| Code | Description | Maker |
| MI | Chanter Tape |  |
| M2 | 50g Yellow Hemp | 
|
| M3 | 50g Black Waxed Hemp | 
|
| M4 | 6m Tying In Cord | 
|
| M5 | 125g Tying Cord | 
|
| M6 | 500g Tying In Cord | 
|
| M7 | 250ml Airtight Bagpipe Seasoing | 
|
| M8 | PB's Pipebag Dressing | 
|
| M9 | Rubber Bag Stoppers (Set of four) | 
|
| M10 | Rubber Drone Stoppers (Set of three) | 
|
| M11 | Piper's Third Hand. This handy device fits easily over your pipe chanter to make tuning your drones easier and more accurate. With the 3rd hand covering the holes normally covered by B, C and D fingers of the bottom hand, simply tune drones and remove the device so you can start to play. It is a must for every piper! | 
|
| M12 | Bristle Cleaning Brushes (Set of four) | 
|
| M13 |
Bristle Practice Chanter Cleaning Brush
|
|
| M14 | Soft Cloth Pipe Chanter Brush. Chanter Brushes allow you to clean the chanter bore which can collect a great deal of sediment which, if allowed to build up, diminished the bore and changes the pitch. The absorbent cotton brushes are 15" long with 4" of tapered cotton specifically designed for the chanter. It can also be used to clean out the chanter note holes. | 
|
| M15 | Soft Cloth Drone Brush. Drone Brushes are 17" long with a 9" absorbent cotton tip to remove any moisture from the drone after playing. The soft cotton will not scratch the wood and can be washed out when soiled. | 
|
| M16 | Rubber Blowpipe Valve |   |
| M17 | Little Mac Valve |  |
| M17a | Reamer for "Little Mac". This is to install the valve if the opening at the end of the blowpipe is too small. |  |
| M18 | Bagpipe Chanter Reed Protector |
 |
| M19 | Goose Adapter (fits Practice Chanter to Bagpipes) |  |
| M20 | Bagpipe Bore Oil. A special preservative to help prevent cracking and warping of the bagpipe due to excessive dryness or over-absorption of moisture. Comes in a 1.25oz bottle and should be used occasionally to keep the wood in good condition and will enhance drone tone due to smoother bores. |
 |
| M21 | Pull Through Swab |  |
| M22 | Airstream Blowpipe. Available in 8", 9",
10", 11" and 12" lengths. Select length needed. Includes built in extra large "Little Mac" valve. Wide bore, built-in "Little Mac" valve. |
 
|
| M23 | Aitstream Mouthpiece. Special Oval mouthpiece specifiaclly designed for the Airstream Blowstick. Will fit most other blowsticks too. Available in 3 1/2", 4 1/2" and 5 1/2" lengths. Includes mouthpiece protector. |  |
| M24 | Moisture Control Systems | 
|
| M25 |
Quick Stop Drone Valve. The tension on the quick stop
drone valve is now screw adjustable giving greater accuracy and once
properly installed to suit your blowing strength. The Quick Stop Drone Valves should ensure that you strike your pipe in without difficulty, provide a steady flow of air to your drone reeds and close tightly when pressure is decreased to ensure a clean "cut-off". |
|
| M26 | Shepherd Tone Enhancers. This unique design concept of the tone enhancers stablizes and controls air flow distribution to the drone reeds. Thus dramatically increasing the air efficiency of your instrument. It enable you to enhance the element of tonal control between the relationship of chanter and drones. It enhances the chanter sound without the baggage of coarse drones. And it enhances greater tonal clarity and quality. | 
|
| M27 | Drone Valves |
 |
| M28 |
Teeth Guard Two latex pieces that will fit a standard or Airstream Mouthpiece. Matches plastic mouthpiece. Soft tubing protects plastic mouthpiece and cushions lips and teeth. Run under warm water to soften and stretch before installation. |
  |
| M29 | Mouthpieces |  |
| M30 | Flexistick. This blowstick comes with a ball joint below to enable user to adjust position of mouthpiece. This Flexistick comes in a set with a changable traditional round mouthpiece or the new improved oval-shaped mouthpiece. This Flexistick is also able to adjust its length to suit individual needs. |
 |
| M31 | Piper-Safe. This package contains two sets of hearing protectors and an insertion tube for ease of application. Each hearing protector contains a special filter, which prevents exposure to excessive noise, whilst still allowing you to hear the music. There are two sets of attenuation filters for use in different enviornments. | 
|
| M32 | Reedbox. Holds up to 5 reeds with built in humidity control |
 |
| M33 | Piper's
Pal. The Piper's Pal holds 4 chanter reeds in this low
maintenance, portable case. Absorbs moisture when reeds are wet. Provides moisture when reeds are dry. With the Piper's Pal your reeds will: - Always be ready to play ; keep four reeds in playing condition - Stabilize quickly and remain stable when played - Store indefinitely and be restored to playing condition in minutes - Break in quicker with minimum effort - Last longer and minimize mold and mildew. All Piper's Pal Products are "Patent Pending " |
|
| M34 | Piper's Pal for Retailers and Bands. A larger container designed to hold 40 chanter reeds. Reeds should be placed staple down into the container. Always have spare reeds ready at competition. Store all your reeds humidified and ready to play. | 
|
| M35 | Piper's Pal Recharge Kit.
Recharge of the humidity control system is recommended annually. Available for: Piper's Pal, Piper's Pal Reed Protector, Piper's Pal for Bands, and Piper's Pal for Drone Reeds. |
|
| M36 | Piper's
Pal Extra Reed Tray. An extra tray is available to increase the
capacity of the Piper's Pal to hold 8 reeds in total. An Extra Tray is also available for the Piper's Pal for Bands and Retailers. This will allow separation of different kinds and strengths of reeds in the case. |
|
| M37 | Stock Valve. The
“Stock Valve” is held in by a universal neoprene fitting to the base
of the blowpipe stock. This
unit gives an excellent delivery of air, and is not dependant on back
pressure for closure. All
this eases blowing, keeping a constant controllable pressure on the reeds.
A water trap is incorporated, simple, and efficient and fits easily (can also be removed easily) to the top of the “Stock Valve” creating a sump. No more bother with bits of leather, hemp, tubes and restrictive after market products. |
|
Correspondence Address
318B Anchorvale Link #10-253 Singapore 542318 Republic of Singapore For enquiries, please call +65-9780 1978 or fax: +65-6555 4933 email: info@highlandbiz.com
